Existing ground and first floor
The building is currently a single apartment / huge family warehouse.
Proposed plans
Idea is to create 4 apartments as follows:
Flat 3 - entrance
Due to a 60cm difference in floor level on two halves of the building upstairs, idea here is to create a landing two steps below the main floor (with a 3rd step to reach the main door from the staircase landing outside). Within the extra room height created by this lower landing, an additional bathroom could be added with a small mezzanine above for a second bed. A Velux window could also be added.
Forgive the basic graphics, just starting to learn google sketchup, amazing app.
this probably only makes sense to me...
flat 3 lounge as it is now... (a mess)
Flat 2
This would be the smallest flat, a studio apartment open plan, with kitchen area by the entrance. The boiler would be to the right of the entrance door as you come in, and the flue would go through the roof, unless i can find a viable communal heating system.
animated...(with added camera-shake effect)
as it is now... (my bedroom)
Flats 1 & 4 (downstairs)
Work-in-progress. To be continued...
Would-be flats 1 & 4, as they are now...
Windows windows
Here is the east-side exterior wall as it is now. The window is recent (last century), the original opening was taller (note the red-brick in-fill), presumably a wooden barn door filled this space, hay bundles thrown up through it from passing delivery carts.
Photo 1 - existing
Idea below is to re-open the full length of the original opening, let more light in etc. Will probably need laminated toughened glazing on all windows to resist vandals throwing stones (sadly). Also open a new window downstairs for additional light into flat 4.
Photo 2 - new window on ground floor, and replacement on 1st floor
Below is one idea to add some crazy round windows onto the right-hand side of the building, to break up the large dull stone wall, and give additional lighting to the staircase and flat 1.
Photo 3 - add 2 round windows in unit 1 and one in staircase
Round windows not everyone's taste, how about some turret openings for taking aim onto the vandals...? Looks a bit prison-like though.
Photo 4 - add slit windows below existing vents
Or maybe arch the window for flat 4... ?
Photo 5 - arched ground floor window
I tried a conventional window on the right-hand side but it just looks lost in the large expanse of wall, no not bothering to show it.
Any other ideas welcome! Especially photos or addresses of properties with potentially suitable windows (i can check on google street-view)
Thanks for your attention.
Interesting and good progress, the round windows look very good, I got several ideas for the top flat on the long gallery, but might be too much extra work.
ReplyDeleteNot quite sure I understand how the stairs are going up on each of the upstairs flats.
Thanks, let me know your ideas, the "long gallery", flat 2, is the smallest and perhaps trickiest.
ReplyDeleteThere is a single staircase, see plans above, that arrives at a landing at the end of the long gallery. From here there are two doors, opening left and right for each of the flats upstairs.
From the landing there is one step before entering the door to flat 3, then 2 more steps inside flat 3. There are no more steps into flat 2 (long gallery) as the landing is already at that level.
Thanks for the extra info, ingenious way of doing the stairs, I am sure you have looked into all possibilities, the couple of ideas I had are quite different, but you provably know better.
ReplyDelete